Help / Codes that scan
Laser engraving mode
Included with Starter and up
Engrave QR codes on wood, metal, glass, acrylic and leather that scan first time.
Engraving is hard on QR codes: the laser's burn spreads, small dots fill in, and many surfaces end up light marks on dark.
Engraving mode (Starter and up) fixes this:
- Low error correction for the biggest possible dots
- Minimum dot size per material, with a warning if yours is too fine
- A choice of dark marks on a light surface, or light marks on dark
- Crisp vector SVG, PDF and EPS at the exact size
Minimum dot size
- Metal: 0.35 mm
- Acrylic: 0.5 mm
- Wood: 0.6 mm
- Glass: 0.7 mm
- Leather: 0.8 mm
Always engrave one test piece and scan it with two different phones before running the batch.
Didn’t answer your question? Contact support.